Magnum-venus-plastech Powerhead VPH-10000 Manual do Utilizador

VPH-10000 Powerhead Manual 10.00” Diameter Rev. 05/2012

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 10 A. The reaction is unpredictable. Prior use of an HHC solvent without incident (corrosion or explo

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 11 2.4 Catalyst Diluents Magnum Venus Plastech spray-up and gel-coat systems currently produced are d

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 12 2.8 Treatment of Chemical Injuries Great care should be used in handling the chemicals (resins, ca

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 13 3.0 Equipment Safety WARNING Magnum Venus Plastech suggests that personal safety equipment such as

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 14 3.2 Grounding Grounding an object means providing an adequate path for the flow of the electrical

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 15 Introduction: This manual covers the 10” diameter by 4” stroke length Powerhead VPH-10000. The

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 16 Valve Block Disassembly: 1. Remove the two Hex Head Screws (F-HB-04C-56-SS) from the front of t

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 17 6. Remove the Button Head Cap Screw (F-BHCS-04C-16-SS) from the front of the Lower Valve Block (M

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 18 Valve Block Reassembly: NOTE: Removable thread lock compound will be required for reassembly. If

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 19 6. Install the Valve Exhausts (MPH-5009) onto the Upper and Lower Valve Blocks. One side of the

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 2 CORPORATE HEADQUARTERS and MANUFACTURING 11692 56th Court * Clearwater, FL 33760 *

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 20 Air Cylinder Disassembly: 1. Remove the Quick Pin (7203-8-1) from the Piston Rod (VPH-10008).

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 21 Pilot Valve Rebuild: NOTE: The two pilot valves in the upper and lower end caps are the same. S

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 22 4. Remove the Stem Seal (MPH-2511-01) from the bottom of the Upper End Cap (VPH-10002). Remove th

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 23 Air Cylinder Reassembly: 1. Install the Piston Rod Bushing (VPH-10011) with new O-rings into t

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 24 Parts Drawings: VPH-10000 10” POWER HEAD ASSEMBLY – 4” STROKE VPH-10000-SK 10” AIR MOTOR - SE

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 25 Revision Information: Rev. 02/2010 Created the Manual Rev. 02/2010-A Added Safety & Wa

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 26 MAGNUM VENUS PLASTECH CORPORATE HEADQUARTERS and MANUFACTURING 11692 56th Court * Clearwat

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 3 TABLE OF CONTENTS: SECTION: Page TERMS & CONDITIONS OF SALE 4 SAFETY

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 4 Terms & Conditions of Sale: • Customs duties, import and export licenses and certificates, if

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 5 against the Seller in respect of the goods, the liability of the Seller shall be limited to the val

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 6 SAFETY & WARNING INFORMATION: OPERATING YOUR POLYESTER SYSTEM SAFELY 1. Introduction Any tool,

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 7 Extinguishing Media – Foam, Carbon Dioxide, Dry Chemical, Water Fog. Copies of the above bulletins

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 8 2.2 Catalyst (Methyl Ethyl Ketone Peroxide) MEKP is among the more hazardous materials found in com

VPH–10000 Powerhead Manual Rev. 05/2012 Page | 9 D. Never add MEKP to anything that is hot, since explosive decomposition may result. E. Avoid conta